finite element model是什么意思_finite element model怎么读_finite element model翻译_finite element model的词义辨析_finite element model的相关短语_finiteelementmodel的翻译_finite element model的音标

1、

Stress distribution of the spine in upright, flexion and extension postion was analyzed using a three-dimensional finite element model of the spinal motion segment.

本研究采用脊柱活动节段的三维有限元模型分析了脊柱在直立位、前屈位和后伸位的应力分布情况。

互联网摘选

2、

A Finite Element Model Response Analysis on the Vibration of the Spinning Machine

剑杆织机振动问题的有限元模态响应分析

互联网摘选

3、

The finite element model of a small punch test specimen of 1 Cr 0.5 Mo steel is established.

基于小冲孔蠕变试验,建立1Cr0.5Mo耐热钢小冲孔蠕变试样的有限元模型.

互联网摘选

4、

Primary study on the construction of the finite element model of tooth and post-core.

牙齿与桩核三维有限元建模的初步探讨.

互联网摘选

5、

A finite element model for single-walled carbon nanotubes ( SWCNT ) is introduced.

实验提出了一种针对单壁碳纳米管的原子尺度有限元模型.

互联网摘选

6、

Its finite element model is established.

构造了其有限元模型.

互联网摘选

7、

A static finite element model of an air spring was given.

摘要文中建立了空气弹簧的静态有限元模型.

互联网摘选

8、

Objective To explore a new method to construct the three-dimensional finite element model of micro-implant-maxilla using Materialise ′ s interactive medical image control system ( Mimics).

目的探索基于Mimics医学图像处理系统的CT法快速建模新思路，建立几何相似性好、可灵活组装、含微植体的上颌骨三维有限元模型。

互联网摘选

9、

A finite element model for drawing process of high carbon wire with inner micro-defects was built.

通过对高碳盘条内部缺陷的假设,采用有限元法研究了高碳盘条拉拔过程中,工艺参数对裂纹扩展情况的影响.

互联网摘选

10、

Dynamic finite element model updating of stay-cable based on the most sensitive design variable

基于最敏感设计参数的斜拉索有限元动力模型修正

互联网摘选

11、

Construction of three-dimensional and non-liner finite element model of Ni-Ti arch wire for orthodontics.

正畸NiTi弓丝三维非线性有限元建模研究.

互联网摘选

12、

Objective : To build a three-dimensional finite element model of temporomandibular joint and the mandible.

目的: 建立正常人下颌骨三维有限元模型,为以后的生物力学研究和分析奠定基础.

互联网摘选

13、

Methods. A3-dimensional, nonlinear finite element model of a lumbar spinal segment L4-L5 was used.

方法：我们使用了一个关于L4-L5腰椎的3维非线性有限元素法的模型。

互联网摘选

14、

Thermal expansion deformation for resistanee spot welding of low-steel is simulated by an finite element model.

用有限元方法模拟了低碳钢点焊过程的热膨胀变形.

互联网摘选

15、

Established the finite element model of the transverse vibration of BHA.

建立了下部钻具组合横向振动的力学模型.

互联网摘选

16、

This paper presents the development of a three-dimensional finite element model of central maxillary incisor.

以上颌中切牙为解剖学基础建立了三维有限元模型.

互联网摘选

17、

When creating the finite element model, complicated connections among howitzer components are considered, especially the large displacement slide and the nonlinear spring connection between gun tube and cradle rail.

在建立有限元模型时，考虑了火炮各部件间复杂连接，尤其是身管与摇架导轨间的大位移滑动接触和非线性弹簧单元连接等非线性问题；

互联网摘选

18、

By using the finite element model , strip instateingap control mode.

阐述铝箔轧制中板形缺陷产生的原因和板形控制原理及其方法.

互联网摘选

19、

Drawing Realistic 3-D Graph by Means of the Data of Finite Element Model

利用有限元模型数据绘制真实感三维图形

互联网摘选

20、

BP network train sample mode analyse the income by finite element model.

BP网络训练样本由有限元模型模态分析所得.

互联网摘选

21、

The papers whose research object is a 14-floor frame-supported shear wall. By establish a 3-dimension finite element model and use the analysis soft-ANSYS, make the study focus on the static analysis.

本文以一幢14层的框支剪力墙结构为研究对象，通过建立三维有限元分析模型，运用大型有限元分析软件ANSYS对结构进行静力分析。

互联网摘选

22、

The Application of Revisable Method of Finite Element Model to Structure Dynamic Design

有限元模型修正法在结构动态设计中的应用

互联网摘选

23、

Establishment Method of the Finite Element Model Considering Actual Fiber Orientation and Ply Splice

考虑纤维实际取向和铺层拼接问题的有限元模型建立方法

互联网摘选

24、

For the purpose of control vibration on real time, dynamic condensation method is adopted to reduce the finite element model of a certain platform. The displacement responses of the two models under the environmental loadings agree with each other well.

采用动力减缩技术，得到适于振动控制研究的平台减缩模态，在随机环境载荷激励下，减缩模型与有限元模型两者位移响应具有较好一致性。

互联网摘选

25、

Research for mesh creator in the finite element model

有限元建模中离散单元问题研究

互联网摘选

26、

The Construction of the Three-dimensional Finite Element Model of the Human Skull.

颅面骨三维有限元模型的建立.

互联网摘选

27、

The finite element model was established for numerical simulation of stamping drawing with numerical simulation software ETA/ DYNAFORM.

利用数值模拟软件ETA/DYNAFORM，建立冲压仿真有限元模型，进行冲压拉延仿真数值模拟。

互联网摘选

28、

The principles to construct finite element model modal analysis of the cylinder block have been obtained.

通过研究,得出了建立内燃机机体的有限元模型的一些原则.

互联网摘选

29、

Establishment of three-dimensional finite element model of human orbital bone based on CT

基于CT人眶骨三维有限元模型的建立

互联网摘选

30、

Identification of Moving Loads for Complex Bridge Structures Based on Time Finite Element Model

基于时间元模型的复杂桥梁结构移动荷载识别

互联网摘选